Building a Home on a Sattva Ekatra Plot: DPA Norms Explained

The Doddaballapura Planning Authority (DPA) is the planning authority for this area. It sanctioned the Sattva Ekatra layout under plan number DPA/TP/LAO/30/25-26 on 17 July 2026, as filed with Karnataka RERA.

BIAAPA or DPA? Which Authority Applies to Sattva Ekatra

Pincode 562163 covers villages that fall under different planning authorities, so the correct authority depends on the village and survey number, not the pincode. By Government of Karnataka notification dated 30 November 2017, under Section 4(B) of the Karnataka Town and Country Planning Act 1961, 257 villages of Doddaballapur Taluk — including Kasaba Hobli, Doddabelavangala, Sasalu and Madure — were removed from the Bengaluru International Airport Area Planning Authority (BIAAPA). The Doddaballapura Planning Authority (DPA) was then constituted on 20 March 2018 under Section 4(C) of the same Act.

Sattva Ekatra is at Thippapura Village, Kasaba Hobli, Doddaballapura Taluk. It therefore falls under the Doddaballapura Planning Authority (DPA), and its layout is sanctioned under DPA plan number DPA/TP/LAO/30/25-26 dated 17 July 2026, as filed with Karnataka RERA. Buyers searching for “BIAAPA approval” for this project should look for the DPA sanction instead; a separate BIAAPA approval does not apply to this layout.

For plots in this layout, buyers must follow DPA zoning and building rules. These rules control land use, road width, setbacks, floor area, height and plan approval.

This means a buyer cannot build any type of house only based on personal choice. The building must match the approved land use and planning rules.

DPA norms matter because Sattva Ekatra is a plotted development. Buyers are not buying a ready apartment. They are buying land where they may build a home later.

Before building, the plot owner must get the building plan approved. The plan must follow the authority rules. This protects the buyer from future legal issues.

It also helps keep the plotted community planned. Roads, drainage, open space, utility lines and building heights must follow a proper layout plan.

Sattva Ekatra offers plots from 600 sq. ft. to 1,800 sq. ft. Buyers can choose smaller or larger plots based on budget and home plan.

The final home design will depend on the plot size and road width. A 600 sq. ft. plot will have less buildable space than a 1,200 sq. ft. or 1,800 sq. ft. plot.

A buyer must get building plan approval before starting construction on a Sattva Ekatra plot. This approval confirms that the proposed house follows planning rules.

The building plan normally shows:

• Plot size
• Road width
• Site boundary
• Setbacks
• Ground floor plan
• First floor plan, if planned
• Staircase
• Parking space
• Septic or drainage connection
• Water connection
• Electrical plan
• Elevation
• Total built-up area

The plan must be prepared by a licensed architect or engineer. Buyers should not start foundation work without approval.

Setback means the open space that must be left around the house. It usually applies to the front, rear and sides of the plot.

Setbacks are important for light, air, privacy, fire safety and drainage. They also prevent houses from touching the plot boundary.

The exact setback depends on:

• Plot size
• Road width
• Building height
• Land use
• Approved layout rules
• Local planning regulation

Buyers should not assume one fixed setback for all Sattva Ekatra plots. A 20x30 plot and a 30x60 plot may not have the same building scope.

FAR means Floor Area Ratio. It decides how much total floor area can be built on a plot. The permitted FAR can change based on road width, plot size and planning rules.

For example, a wider road may allow better building scope than a narrow road. A larger plot may also give more design flexibility.

Buyers should check FAR before finalising the house plan. This helps avoid overbuilding. If the plan crosses the allowed FAR, approval may not be given.

Many buyers want to know if they can build G+1 or G+2 homes on Sattva Ekatra plots. The answer depends on the approved rules for that plot.

Height rules can depend on road width, plot size, setback and planning authority limits. Buyers should confirm this before planning a large house.

A smaller plot may suit a compact home. A larger plot can give better scope for a bigger home, parking and garden space.

Parking must be planned inside the plot as per approval norms. Buyers should not depend on internal roads for permanent parking.

A house plan should keep space for car parking, two-wheeler parking and entry movement. This matters more in a gated plotted community because road space must stay clear.

If a buyer wants to build a rental unit or larger home, parking should be planned from the start.

Before building on a Sattva Ekatra plot, buyers should collect all required documents. These documents help during plan approval and bank loan checks.

Important documents include:

• Sale deed
• Khata or property record
• Latest tax paid receipt
• Encumbrance certificate
• Approved layout plan
• Plot allotment letter
• Building plan drawing
• Architect or engineer certificate
• Owner ID proof
• RERA details after approval
• NOC, if required

The final list can change based on authority rules. Buyers should check the latest requirement before applying.

Sattva Ekatra is RERA-approved under PR/180926/008945. Buyers can verify RERA number PR/180926/008945 on the Karnataka RERA portal before registration. Construction on individual plots should happen only after proper handover and building plan approval.

As of September 2026, the project is a new launch. The marketing office is open. Site access is ready. The entrance, visitor parking, signage and boundary wall are visible. Internal layout work has not started yet.

Internal roads, drainage, water lines and power lines are scheduled to start from 1 October 2026, the RERA-filed project start date. Buyers should wait for these basic services before planning construction.

Many plot buyers make mistakes because they treat a plotted layout like open land. This can create approval and resale problems later.

Avoid these mistakes:

• Starting construction without plan approval
• Ignoring setback rules
• Building more than allowed FAR
• Not checking road width
• Not leaving parking space
• Changing the approved plan without permission
• Assuming all plots have the same rules
• Not checking drainage and utility points
• Booking before checking RERA status
• Depending only on verbal promises

A clean approval process is better than faster construction.

No. Buyers should not assume they can build immediately after paying the booking amount. Sattva Ekatra is still in new launch stage, and RERA registration is approved under PR/180926/008945.

Home construction can start only after key steps are complete. These include RERA approval, plot registration, handover, utility readiness and building plan approval.

Buyers should ask the developer for a clear timeline. They should also check when plot demarcation, roads, drainage, water and power will be ready.

Sattva Ekatra can be a good option for buyers who want to build a home in North Bengaluru over the next few years. The project has STRR access, railway access and airport-side location value.

The location is about 300 m from STRR / NH 648. Doddaballapur Railway Station is about 1.7 km away. Kempegowda International Airport is about 36.5 km away.

The project also has 45% open area and 25+ amenities. This can help buyers who want land ownership with community features.

Before building a home on a Sattva Ekatra plot, buyers should check the legal and planning side first. The plot size and price are important. But approval rules are equally important.

Check these before starting:

• Official RERA number
• Approved layout plan
• Plot registration
• Road width
• Plot facing
• Setback rule
• FAR limit
• Height permission
• Building plan approval
• Water and power readiness
• Drainage connection
• Maintenance rules

A planned approach will save time and money.